qubeBOX
Realistic simulation training needs reliable data without extra organisational effort. The qubeBOX combines cutting-edge sensor technology in a single central unit – connected wirelessly to the qubeSERIES and independent of the manikin used. Routine tasks run automatically, so instructors can focus on team performance and debriefing.
Built for simulation centres, EMS schools, universities and hospitals that want objective CPR and ventilation data with any manikin they already own.

Sensor features at a glance
The qubeBOX transmits real measurements from the scenario directly to the qubeSERIES – for authentic monitor reactions and objective feedback.
Smart SpO₂ detection
SpO₂ waveform and value appear on the monitor as soon as the sensor is applied – the value itself is set by the trainer.
Real-time CPR feedback
Certified sensor for depth, rate and recoil – with automatic CPR artefacts on the monitor and live data on qubeCONTROL.
Ventilation sensor
Placed between bag and mask: volume and rate of bag-valve-mask ventilation – to train against hyperventilation.
Hard paddle defibrillation
True-to-original hard paddles for adult and paediatric scenarios – simulated shock, no real current.
CPR DASHBOARD
The trainer's view in qubeCONTROL
All qubeBOX data come together in the CPR dashboard on qubeCONTROL – live during the scenario.
Fits perfectly into the Hardware Set "L"
With hardware version V2, the qubeBOX has an optimised housing design: the same reliable sensors and functionality, now fitting even more seamlessly into the side pocket of the Hardware Set "L". Wireless data transmission and its own power bank make it usable anywhere – in the simulation centre, hospital or ambulance.
-
Overview
-
CPR Sensor
-
Ventilation Sensor
-
SpO₂ Sensor
-
Hard Paddles
-
Any manikin
Three sensors and hard paddles – one unit
All sensors and the hard paddles are connected to the qubeBOX by cable – for reliable data without connection losses. The qubeBOX itself transmits wirelessly to the qubeSERIES and runs on a battery pack.
- CPR sensor: certified medical device sensor for compression depth, rate and recoil – with automatic CPR artefacts on the monitor.
- Ventilation sensor: placed between bag and mask, measures volume and rate of bag-valve-mask ventilation.
- SpO₂ sensor: activates the SpO₂ waveform and value on the monitor as soon as it is applied.
- Hard paddles: true-to-original paddles for adult and paediatric scenarios – simulated shock, no real current.
CPR and ventilation data appear live on qubeCONTROL during the scenario.
Real-time CPR feedback
The CPR sensor is a certified medical device sensor that delivers the best possible data for evaluation by the trainer. It measures compression depth, rate and recoil and meets, among others, the AHA requirements for CPR training.
The sensor is connected to the qubeBOX by cable – just as CPR sensors are firmly connected to the ECG monitor in real operations. Unlike earlier battery-powered versions, there is no charging and no extra device to manage.
Automatic CPR artefacts: as soon as compressions start, the typical CPR artefact waveform you would expect on the ECG of a patient under resuscitation appears on the simulation monitor – and disappears again when compressions stop.
On qubeCONTROL, the trainer sees CPR performance, compression depth and rate in a dashboard snippet, which opens the full CPR dashboard with bar charts, chest compression fraction (CCF) and the SQ CPR score – during the scenario.
Ventilation feedback
The ventilation sensor is placed between the bag and the mask and monitors manual bag-valve-mask ventilation. It measures ventilation volume and rate: the respiratory rate is transmitted to the simulation monitor by the sensor, and while the team ventilates, the etCO₂ waveform appears on the monitor. The etCO₂ value itself is set by the trainer on qubeCONTROL.
Why it matters: in stressful situations, teams tend to hyperventilate – with negative effects on the patient. Sufficient, data-based training builds confidence and contributes to a positive patient outcome.
Just like the CPR data, volume and rate appear in the CPR snippet on qubeCONTROL and in the full CPR dashboard – during the scenario.
Smart SpO₂ detection
The SpO₂ sensor uses its light sensor to detect when it is applied to the finger or the manikin. Only then are the SpO₂ waveform and value activated on the simulation monitor – just like on a real patient. When the sensor is removed, they disappear again.
On qubeCONTROL, an icon shows the trainer that the SpO₂ value is activated and deactivated by the sensor. The value itself is still set by the trainer on qubeCONTROL – applying the sensor only switches the display on.
Fewer simulation artefacts: trainers no longer have to remember to switch on the SpO₂ display at the right moment. This reduces their cognitive load and prevents participants from having to ask for a value that is missing on the monitor.
Realistic defibrillation with hard paddles
The hard paddles are connected to the qubeBOX by cable. They are true-to-original paddles and can be used for both adult and paediatric scenarios.
Operation works just like on the real device: energy select and the joules are set with the + and – buttons on the paddles, and the selection is also shown on the patient monitor. Once the defibrillator is charged, the buttons light up orange. Only when both shock buttons are pressed simultaneously is a simulated shock delivered – visible on the monitor as well.
An additional holder places the paddles on the hardware set, so they are always transported with it.
Safe training: in many markets hard paddles have been replaced by adhesive pads, but some regions of the world still use them. With the qubeBOX, teams train paddle defibrillation safely – only a simulated shock is delivered, with no real current flow.
Turn any manikin into a mid-fidelity simulator
Simulation training usually takes place with manikins or standardised patients (SP). With the qubeBOX you are no longer tied to a specific manikin type: connect its sensors to the standard CPR or airway manikin you already own and turn it into a mid-fidelity simulator – with real-time CPR, ventilation and SpO₂ data on the qubeSERIES patient monitor.
The qubeBOX fits into the side pocket of Hardware Set "L", transmits wirelessly and runs on a power bank, so it goes wherever your training takes place. For a direct integration of Gaumard and Ambu manikins, see qubeCONNECT.
FAQ
Frequently asked questions about the qubeBOX
What is the qubeBOX?
The qubeBOX is the sensor unit of the qubeSERIES. It combines an SpO₂ sensor, a CPR feedback sensor and a ventilation sensor in one central unit that transmits wirelessly to the SKILLQUBE patient monitor simulators.
Which sensors does the qubeBOX include?
An SpO₂ sensor with automatic contact detection – the saturation waveform only appears once it is applied – a CPR sensor for compression rate, depth and recoil, and a ventilation sensor for rate and volume.
Does the qubeBOX work with any manikin?
Yes. The qubeBOX is independent of the manikin type: it turns any standard CPR or airway manikin into a mid-fidelity simulator with real-time CPR, ventilation and SpO₂ data. For a direct integration of Gaumard and Ambu manikins, see qubeCONNECT.
How does CPR and ventilation feedback work?
Compression rate, depth and recoil go directly to the CPR dashboard on the controller iPad. The ventilation sensor, placed between bag and mask, measures volume and rate of bag-valve-mask ventilation. It transmits the respiratory rate to the monitor and makes the etCO₂ waveform appear while the team ventilates; the etCO₂ value itself is set by the trainer.
Can trainees defibrillate with the qubeBOX?
Yes. True-to-original hard paddles are connected to the qubeBOX by cable. Trainees select the energy, charge and deliver the shock with the buttons on the paddles, just like on the real device – but only a simulated shock is delivered, with no real current flow. The paddles can be used in adult and paediatric scenarios.
Does the qubeBOX need a power outlet?
No. The qubeBOX runs on a battery pack and transmits wirelessly to the qubeSERIES, so it goes wherever your training takes place. The sensors and hard paddles are connected to the qubeBOX by cable – for reliable data and no risk of losing the connection during the scenario.
Questions about the qubeBOX? We are happy to help.
Our team is happy to answer your questions about integration, training or technical details – or connect you with your local distributor.