qubeMX800
The qubeMX800 simulates the Philips* IntelliVue MX800 and supports versatile simulation training in anaesthesia and intensive care medicine. The tablet-based system realistically replicates the functions of the original device – from a comprehensive alarm system and non-invasive blood pressure measurement to two profile views for anaesthesia and intensive care and a wide range of intensive care parameters.
Built for anaesthesia and intensive care teams, hospitals and nursing and medical schools – so staff train patient monitoring on a realistic ICU monitor interface.
*Philips is a registered trademark.


Everything the real device does, ready for training
Simulations help teams train their skills and treatment methods precisely and anchor them through constant repetition.
Patient monitor
Fully functional patient monitor interface.
Alarm system
Technical and medical alarms incl. alarm pause settings.
NBP
Non-invasive blood pressure, manual or automatic at set intervals.
Two profiles
Anaesthesia and intensive care views.
ICU parameters
ABP, CVP, etCO2, temperature, BIS, PPV and more – with waveforms.
QRS tone & standby
Adjustable QRS tone volume and standby mode.
Controller & Assessment
qubeCONTROL for the trainer, qubeASSESS for the trainee.
qubeCLOUD
Connected to our qubeCLOUD Scenario Editor.
Monitor. Controller. Assessment.
Besides the monitor iPad, the hardware set includes qubeCONTROL, qubeASSESS and training cable sets for adults and children – safely and compactly stored in the instructor bag. Real-time changes and individual scenario settings provide the most realistic training possible.
-
qubeCONTROL
-
qubeASSESS
-
qubeCLOUD
-
Debriefing
-
Hardware
Everything under control
qubeCONTROL lets trainers steer and influence scenarios in real time. Sudden changes in the patient's condition create highly realistic stress situations that go far beyond a linear sequence. Thanks to qubeCLOUD, prepared scenarios can be loaded, played and adapted at any time.
- Full vital-sign control: ECG, SpO2, IBP, etCO2 and respiratory rate via sliders, incl. waveform libraries, trend times and instant transfer to the monitor.
- CPR: rhythm changes during CPR, manual CPR artefacts, PEA and a real-time CPR dashboard.
- Advanced diagnostics: 12-lead ECG quick selection, blood glucose, temperature, lab reports and auscultation.
- Scenario & system management: scenario control with phase view, qubeCLOUD sync and a clear connection centre.
- Documentation & alerting: pager alerting, media library, documentation of measures, CPR feedback and an automatic logbook.
More reality, less artificial practice
- Realistic start: pager alert and CO warner, just like a real mission.
- Examination: auscultation of heart, lungs and abdomen (front and back), blood glucose, body temperature and manual blood pressure.
- ICU monitor: ICP, PAP, BIS and CVP with waveforms plus further ventilation and haemodynamic values.
- Checklists: checklists such as the ABCDE scheme as a quick reference.
- Media center: the “printed” 12-lead ECG from the simulation monitor, lab reports, PDFs, images, videos and SOPs.
For the training of tomorrow
Create, manage and share realistic training scenarios in the browser. Prepare content with the integrated scenario editor – freestyle or scripted – and load it later via qubeCONTROL.
- Central management: devices, users and access rights in one place; SimConfig sets uniform parameters for all devices; pager texts, alarms, lab reports and SOPs are maintained and synchronised centrally.
- Ready-made cases: synchronise all available AHA cases and SKILLQUBE cases with one click, embed videos and documents.
- Education Center: e-learning courses and help, whenever you need them.
- Connected & secure: share scenarios with partner organisations; GDPR-compliant, no installation, on PC, tablet or smartphone.
Debriefing solution
Assessing the situation, giving precise instructions, communicating correctly: team communication and medical procedures have to be trained to make the right decisions in real operations.
Hardware Set "L"
- Hardcase L for the monitor iPad
- Bag with side, back and front pockets for accessories
- Monitor iPad Air 13"
- qubeCONTROL iPad 11" with protective cover
- qubeASSESS iPad 11" with protective cover
- Stationary Wi-Fi router
- Adult cable set: 4-pole ECG monitoring cable incl. 6-pole ECG diagnostic extension, finger SpO2 sensor, NIBP cuff, CO2 sensor, adult defibrillation pads, defib connection cable
- Paediatric cable set: NIBP cuff paediatric/neonatal, SpO2 sensor paediatric/neonatal, paediatric defibrillation pads
Durable, visually almost indistinguishable from a real defibrillator · Latest Apple devices
FAQ
Frequently asked questions about the qubeMX800
What is the qubeMX800?
The qubeMX800 is a patient monitor simulator by SKILLQUBE that simulates the Philips* IntelliVue MX800. The tablet-based system supports versatile simulation training in anaesthesia and intensive care medicine.
Who is the qubeMX800 designed for?
The qubeMX800 is designed for anaesthesia and intensive care teams in hospitals as well as nursing and medical schools that train patient monitoring. Staff practise alarm management and the interpretation of ICU parameters on a realistic monitor interface – without occupying a real monitor.
Which IntelliVue MX800 functions does the qubeMX800 simulate?
The qubeMX800 simulates the patient monitor interface with technical and medical alarms incl. alarm pause, non-invasive blood pressure (manual or interval), anaesthesia and intensive care profiles, and ICU parameters such as ABP, CVP, etCO2, temperature, BIS and PPV with waveforms.
What is included in the hardware set?
Hardware Set "L" contains a hardcase for the monitor iPad Air 13", the qubeCONTROL and qubeASSESS iPads (11") with protective covers, a stationary Wi-Fi router and training cable sets for adults and children – stored in an instructor bag.
Can I create my own training scenarios?
Yes. In qubeCLOUD you create scenarios freestyle or scripted in the browser and load them via qubeCONTROL. All available AHA cases and SKILLQUBE cases can be synchronised with one click.
Interested in qubeMX800?
Send us your request – we will get back to you or connect you with your local distributor.
Simulation Spotlight: Bridging the Reality Gap – the case for tablet-based medical simulation